The Essential Dosage of Corid for Goats

Introduction: Importance of Knowing the Dosage of Corid for Goats

Corid, also known as amprolium, is an important medication for treating goats infected with coccidiosis. Coccidiosis is a parasitic infection that attacks the digestive system of goats and can be fatal if not treated correctly. Knowing the correct dosage of Corid for goats is vital in order to effectively treat this infection.

The purpose of this guide is to provide an understanding of the importance of being aware of the correct dosage of Corid for goats, and to help understand how to administer it properly. The information provided in this guide can help ensure that goats infected with coccidiosis are treated correctly and in a timely manner.

Overview of Corid

Corid is an oral medication used to treat and prevent coccidiosis, a common parasitic infection that can affect goats. Coccidiosis can cause diarrhea, dehydration, and severe abdominal pain in goats. Corid works by targeting the parasites that cause coccidiosis, allowing goats to recover quickly from an infection. It’s important to administer the correct dosage of Corid to your goats in order to ensure their health and safety.

Basic Corid Dosage Instructions

Administering Corid to goats is a relatively straightforward process, though it is important to follow certain steps so that the goat gets the proper dosage. Below are some basic guidelines about administering Corid to goats:

  • Administer Corid orally. Place the tablet or liquid in the mouth of the goat and allow them to swallow it. The dosage should be taken twice a day, with 12 hours in between each dose.
  • When referring to dosage, Corid is measured in milligrams (mg) per pound (lb). For example, a 10 lb goat would take 10 mg of Corid.
  • It is important that you adhere to the recommended dosage and do not give too much or too little. Overdosing can be dangerous, while underdosing will not provide the desired effect.

When administering Corid, ensure that you are following these basic instructions as closely as possible in order to get the best results for your goats!

Weight-Specific Dosage Instructions

It is important to be aware that the amount of Corid you administer to a goat needs to be determined based on its weight. A lighter goat should be given a lower dosage than a heavier one. To determine the correct dosage, you will need to do some basic calculations.

For each pound of bodyweight, goats should be given 2 milliliters (mL) of Corid solution. So, for example, if a goat weighs 40 pounds, it should be given an 80 mL dose of Corid. Alternatively, if your goat weighs 100 pounds, it should receive 200 mL of the solution. It is important to note that Corid is most effective when administered in single doses.

It is also important to remember that the dosage of Corid may vary from goat to goat. If your goat is showing mild, but persistent signs of coccidiosis, you may need to increase the dosage. In this case, speak to your veterinarian as they will be able to provide advice on how to adjust the dosage appropriately.

Precautionary Information

When administering Corid to a goat, it is important to take the necessary precautionary measures to ensure the health and well-being of the animal. While the most common side effects of Corid are minor, there have been reports of more serious adverse effects when used in large doses or with long-term use. Some of the potential side effects include:

  • Diarrhea
  • Abdominal pain
  • Nausea and vomiting
  • Loss of appetite
  • Fever
  • Jaundice (yellowing of the skin or eyes)

If any of these side effects occur, you should contact your veterinarian immediately. It is also important to note that Corid is not recommended for pregnant goats. For more information on potential side effects, consult a veterinarian or read the product label carefully before administration.

Subcutaneous Dosage Instructions

Subcutaneous dosage is a great way to administer Corid to goats. This method is simple and relatively pain-free for the animal. To administer Corid subcutaneously, follow these steps:

  • Make sure you have all the necessary supplies prepared (i.e. syringe, cotton swabs, gloves)
  • Clean the area where you plan to inject the dosage with a cotton swab
  • Fill the syringe with the proper dosage of Corid
  • Slowly insert the syringe into the area and gently inject the medication
  • Remove the needle after the medication has been injected
  • Apply gentle pressure to the injection site with a gauze pad or cotton swab
  • Monitor your animal for any adverse reactions to the medication

Always make sure you are administering the correct dosage of Corid according to the weight of the goat. Never inject a higher dosage than recommended.

Subsequent Dosages

Once the initial Corid dosage has been administered to a goat, it is important to understand how often to repeat the dosage and when to adjust the amount. Depending on the severity of the goat’s condition, Corid should generally be administered every 24-48 hours. If symptoms are not improving or if the goat shows signs of dehydration, it’s best to check in with a veterinarian to determine whether an adjustment in dosage is necessary. Generally speaking, heavier goats may require a larger dose of Corid than lighter goats. In cases of malnourished goats or those suffering from a severe worm infestation, an increase in dosage may be called for.

Health Benefits of Corid

Corid is a widely used medication in the treatment of coccidiosis, a protozoal infection that affects many goats. When administered correctly, this medication can provide a number of benefits to goats. These benefits include:

  • Stimulation of appetite and improved overall digestion.
  • Reduction of the symptoms of coccidiosis such as diarrhea and blood in the stool.
  • Healing of lesions on the intestine caused by the protozoa that causes coccidiosis.
  • Increase in the absorption of nutrients and water leading to weight gain.
  • Reduce the shedding of the coccidia protozoa and a decrease in the risk of reinfection.

All of these health benefits of Corid can be extremely beneficial for goats suffering from coccidiosis, however it is crucial to ensure that the correct dosage is administered in order to avoid any possible side effects.

Common Treatment Mistakes

When administering Corid to goats, there are a few common mistakes that can be made that should be avoided. These mistakes include:

  • Giving too much Corid – Overdosing can have serious consequences for the health of the goat.
  • Not following weight-specific dosage instructions – When administering Corid, the dosage must be adjusted based on the weight of the goat.
  • Not using the correct form – Corid must be administered in either its liquid or powder form.

By being mindful of these mistakes and ensuring all dosage instructions are followed correctly, you can ensure that your goats are receiving the proper dosage of Corid.

Possible Alternatives to Corid

Corid is an important treatment for goats, however there are alternatives that can be considered for treating gastrointestinal parasites in goats. Non-chemical treatments such as a healthy diet of hay and grass can help to reduce the risk of gut parasites. Additionally, many herbal remedies have proven effective, such as garlic, fennel seeds, and oregano. Finally, chemical alternatives such as moxidectin are available, but must be used with caution and according to instructions.

Additional Resources on Administering Corid to Goats

In addition to the information outlined in this guide, there are several other resources that may be helpful when it comes to administering Corid to goats. Here are some of our top recommended resources:

We hope these external resources are helpful as you learn more about administering Corid to goats. As always, if you have any questions or concerns, consult with your veterinarian.


When dosing Corid for your goats, it’s important to be aware of the potential side effects and to adjust the dosage accordingly based on the weight of the goat. It’s essential to remember not to exceed the recommended dosage or administer it too often as this can be dangerous for the health of your goats. When administered correctly, Corid can provide many beneficial health benefits such as reduced parasite load and improved feed efficiency. Here at [name of website], we have provided detailed instructions on how to safely administer Corid to goats, and we’ve also included links to additional resources for further reading.

What is Corid and why is it important for goats?

  • A: Corid is an antibiotic used to treat coccidiosis in goats, which is an intestinal disease caused by an infection. It is important to give goats the correct dosage of Corid to ensure that they get the necessary treatment for their condition while also avoiding any potential side effects.

What is the basic Corid dosage for goats?

  • A: The basic Corid dosage for goats is 2 teaspoons per gallon of water for 5-7 days. If the goat weighs more than 100 pounds, the dosage can be adjusted to 1 teaspoon per gallon.

How should Corid be administered to a goat?

  • A: Corid can be administered to a goat both orally and subcutaneously. When administering Corid via subcutaneous injection, use 1 cc per 20 lb of body weight, once a day for 3-5 days.

How often should the Corid dosage be repeated for goats?

  • A: The Corid dosage should be repeated every 3 to 7 days until the symptoms of the infection have cleared up or the goat’s health has improved. It is also important to adjust the dosages as necessary if the goat’s condition is not improving.

What health benefits can goats get from taking Corid?

  • A: Corid helps to reduce or eliminate the symptoms associated with coccidiosis, such as diarrhea, weight loss, and anemia. In addition, Corid can help to reduce the severity of other conditions such as pneumonia and mastitis.

What are some possible alternatives to Corid for treating coccidiosis in goats?

  • A: There are a number of alternatives to Corid for treating coccidiosis in goats, including natural treatments such as oregano oil and apple cider vinegar, as well as non-chemical options such as garlic, probiotics, and vitamins.

Where can I find additional resources related to administering Corid to goats?

  • A: You can find additional resources related to administering Corid to goats on websites such as the National Center for Biotechnology Information, Veterinary Partner, and Merck Veterinary Manual.

Leave a Comment